Pool Builders Sugar Land Get a Free Quote
Water Chemistry

Pool Chemical Balancing Explained

Part 8 of 10: Pool Ownership 101

Pool chemistry sounds complicated because the numbers are interdependent, not because any single reading is hard to understand. Riverstone and First Colony both require architectural control committee approval for pool and backyard plans, including review of fencing and setbacks relative to the deed restrictions, which is handled during the design phase.

Backyard pool with covered cabana and outdoor seating

The Four Numbers That Matter

Free chlorine (or bromine) is the sanitizer killing bacteria and algae; pH measures how acidic or basic the water is; total alkalinity is a buffer that keeps pH from swinging; and calcium hardness measures dissolved minerals that affect plaster and equipment.

Of the four, pH and alkalinity move together. Alkalinity below about 80 ppm lets pH bounce around with every rain event or chemical addition; alkalinity above about 120 ppm makes pH stubborn and hard to correct. Fix alkalinity first, then dial in pH.

A Practical Order of Operations

Test alkalinity and pH before adding sanitizer. If alkalinity is out of the 80-120 ppm range, correct it with the appropriate increaser or decreaser and retest the next day before touching pH.

Once alkalinity is stable, adjust pH into the 7.2-7.6 range. Only then does chlorine work as efficiently as it should; chlorine added to water with the wrong pH is partially wasted, which is a common reason a pool "won't hold chlorine" even with frequent dosing.

FAQs

How often should I test pool water?

Twice a week is a reasonable baseline for most residential pools in the Houston area given the long swim season, more often during heavy use (parties, frequent rain) or right after shocking.

Why does my chlorine reading keep dropping overnight?

UV exposure burns off unstabilized chlorine, and heat accelerates the process; a cyanuric acid (stabilizer) level in the 30-50 ppm range protects chlorine from sun loss without over-stabilizing the water.

Where This Fits

See our Pool Repair service page, or Financing if cost is the next question.

Related Reading

Stainless steel outdoor kitchen counter and sink
Water Chemistry

Chlorine vs. Saltwater Pools: What's Actually Different

Saltwater pools still use chlorine, generated on-site; here is what actually changes in day-to-day maintenance.

Contemporary home with an attached swimming pool
Water Chemistry

Total Dissolved Solids (TDS) Explained

What TDS actually measures, why it climbs over time, and when it finally means draining some water.

Stone-paved patio balcony overlooking the landscape
Water Chemistry

pH and Alkalinity Basics for Pool Owners

Why alkalinity is the buffer behind pH, and how to adjust each one without chasing the other in circles.

Get a Free Quote

Tell us about your project and we’ll follow up within one business day.